The module has 3 alerts.

The module is not enabled by default in any bundles.

How to explicitly enable the module…

Set the spec.enabled module parameter to true or false in the ModuleConfig/metallb resource (create it, if necessary) to explicitly enable or disable the module, or use the deckhouse-controller module command in the d8-system/deckhouse pod.

Example of enabling the module:

  • by using the ModuleConfig resource:

    apiVersion: deckhouse.io/v1alpha1
kind: ModuleConfig
metadata:
  name: metallb
spec:
  enabled: true

  • by using the deckhouse-controller command (you need a kubectl, configured to work with the cluster):

    kubectl -ti -n d8-system exec svc/deckhouse-leader -c deckhouse -- deckhouse-controller module enable metallb

Example of disabling the module:

  • by using the ModuleConfig resource:

    apiVersion: deckhouse.io/v1alpha1
kind: ModuleConfig
metadata:
  name: metallb
spec:
  enabled: false

  • by using the deckhouse-controller command (you need a kubectl, configured to work with the cluster):

    kubectl -ti -n d8-system exec svc/deckhouse-leader -c deckhouse -- deckhouse-controller module disable metallb

The module is configured using the ModuleConfig custom resource named metallb (learn more about setting up Deckhouse…).

Example of the ModuleConfig/metallb resource for configuring the module:

apiVersion: deckhouse.io/v1alpha1
kind: ModuleConfig
metadata:
  name: metallb
spec:
  version: 1
  enabled: true
  settings: # <-- Module parameters from the "Parameters" section below.

Parameters

Schema version: 1

Examples:

bgpPeers:
- peer-address: 192.168.1.1
  peer-asn: 1111
  my-asn: 2222
  source-address: 192.168.1.2
  hold-time: 10s
  node-selector:
    matchLabels:
      node: test
addressPools:
- name: my-pool-bgp
  protocol: bgp
  addresses:
  - 192.168.100.1-192.168.100.10
  - 192.168.101.0/24
  bgp-advertisements:
  - aggregation-length: 32
    localpref: 100
    communities:
    - no-advertise
bgpCommunities:
  no-advertise: 65535:65282
speaker:
  nodeSelector:
    mylabel: speaker

addressPools:
- name: my-pool-l2
  protocol: layer2
  addresses:
  - 192.168.100.1-192.168.100.10
  - 192.168.101.0/24
speaker:
  nodeSelector:
    mylabel: speaker
  tolerations:
  - key: dedicated
    operator: Equal
    value: speaker
  • settings
    object
    • settings.addressPools
      array of objects

      A list of IP ranges to assign to services.

      Format — a data array similar to that of MetalLB’s.

      Default: []

      • settings.addressPools.addresses
        array of strings

        A list of ranges, where each range can look like a subnet/mask or a numeric address range (with “-“ as a delimiter).

      • settings.addressPools.auto-assign
        boolean

        Auto-assign flag used to prevent MetalLB from automatic allocation for a pool.

        Default: true

      • settings.addressPools.avoid-buggy-ips
        boolean

        Prevents addresses ending with .0 and .255 to be used by a pool.

        Default: false

      • settings.addressPools.bgp-advertisements
        array of objects

        Defines BGP advertisements.

        • settings.addressPools.bgp-advertisements.aggregation-length
          integer

          The aggregation-length advertisement option lets you “roll up” prefix into a larger one.

          Works for IPv4 addresses.

          Default: 32

          Allowed values: 1 <= X

        • settings.addressPools.bgp-advertisements.communities
          array of strings

          Keys from the bgpCommunities parameter to be associated with the announcement.

          Example:

          communities:
- no-advertise
        • settings.addressPools.bgp-advertisements.localpref
          integer

          The BGP LOCAL_PREF attribute which is used by BGP best path algorithm.

          Path with higher localpref is preferred over one with lower localpref.

      • settings.addressPools.name
        string

        The name of the pool (you can specify it using the service annotation as follows: metallb.universe.tf/address-pool: <name>). It should conform to RFC 1123: dot-separated parts in lowercase, consists of alphanumeric characters, ‘-‘. Each part must start and end with an alphanumeric character.

        Pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$

      • settings.addressPools.protocol
        string

        The protocol used by the speaker to announce services.

        Allowed values: bgp, layer2

    • settings.bgpCommunities
      object

      The BGP communities list.

      Example:

      bgpCommunities:
  no-advertise: 65535:65282
    • settings.bgpPeers
      array of objects

      A list of external BGP routers to use with the module.

      Format — a data array similar to that of MetalLB’s.

      The parameter is optional if only the layer2 mode is used to announce services.

      Default: []

      • settings.bgpPeers.hold-time
        integer or string

        The timeout after which the neighboring BGP peer is considered dead. This value is divided by three to get the keep-alive interval.

        The recommended value is 3s (i.e., keep-alive packets are sent once per second). Note that the BGP protocol does not support values lower than this. By default, the parameter is set to 90s (i.e., keep-alive packets are sent every 30 seconds).

        Pattern: ^(0|(([0-9]+)y)?(([0-9]+)w)?(([0-9]+)d)?(([0-9]+)h)?(([0-9]+)m)?(([0-9]+)s)?(([0-9]+)ms)?)$

      • settings.bgpPeers.my-asn
        integer

        Required value

        The AS number in the cluster.

        Allowed values: 0 <= X <= 4294967295

      • settings.bgpPeers.node-selector
        object

        The additional pseudo-selector implemented by the speaker application. It selects nodes that are allowed to connect to external BGP routers. Do not confuse it with speaker.nodeSelector and nodeSelector.

        An optional parameter.

        The format is matchLabels or matchExpressions.

        • settings.bgpPeers.node-selector.matchExpressions
          array of objects
          • settings.bgpPeers.node-selector.matchExpressions.key
            string
          • settings.bgpPeers.node-selector.matchExpressions.operator
            string
          • settings.bgpPeers.node-selector.matchExpressions.values
            array of strings
        • settings.bgpPeers.node-selector.matchLabels
          object
      • settings.bgpPeers.password
        string

        Authentication password for routers enforcing TCP MD5 authenticated sessions.

      • settings.bgpPeers.peer-address
        string

        Required value

        The IP address of the external BGP router.

        Pattern: ^([0-9]{1,3}\.){3}[0-9]{1,3}$

      • settings.bgpPeers.peer-asn
        integer

        Required value

        The AS number on the external BGP router.

        Allowed values: 0 <= X <= 4294967295

      • settings.bgpPeers.peer-port
        integer

        Port to dial when establishing the session.

        Default: 179

        Allowed values: 0 <= X <= 16384

      • settings.bgpPeers.router-id
        string

        BGP router ID to advertise to the peer.

      • settings.bgpPeers.source-address
        string

        The source IP address for outbound connections.

        Pattern: ^(?:[0-9]{1,3}\.){3}[0-9]{1,3}$

    • settings.loadBalancerClass
      string

      Optional field specifying the class of the LoadBalancer. The LoadBalancerClass field is mandatory when using both the metallb and l2-load-balancer modules simultaneously. It is also recommended to fill it in if there are third-party controllers in the cluster that manage Service resources with the LoadBalancer type.

    • settings.nodeSelector
      object

      A selector for the main controller. It is the same as the Pod’s spec.nodeSelector parameter in Kubernetes.

      If the parameter is omitted or false, it will be determined automatically.

    • settings.speaker
      object

      Parameters of the speaker component, which announces services (using bgp or layer2 (LVS) routing protocol) and routes application traffic to its node.

      • settings.speaker.nodeSelector
        object

        Required value

        A selector for the speaker DaemonSet. It is the same as the Pod’s spec.nodeSelector parameter in Kubernetes.

        If the parameter is omitted or false, it will be determined automatically.

      • settings.speaker.tolerations
        array of objects

        Tolerations for the speaker DaemonSet. They are the same as the Pod’s spec.tolerations parameter in Kubernetes.

        If the parameter is omitted or false, it will be determined automatically.

        • settings.speaker.tolerations.effect
          string
        • settings.speaker.tolerations.key
          string
        • settings.speaker.tolerations.operator
          string
        • settings.speaker.tolerations.tolerationSeconds
          integer
        • settings.speaker.tolerations.value
          string
    • settings.tolerations
      array of objects

      Tolerations for the main controller. They are the same as the Pod’s spec.tolerations parameter in Kubernetes.

      If the parameter is omitted or false, it will be determined automatically.

      • settings.tolerations.effect
        string
      • settings.tolerations.key
        string
      • settings.tolerations.operator
        string
      • settings.tolerations.tolerationSeconds
        integer
      • settings.tolerations.value
        string